Brady Virtual Product Support | Laser & Dot Peen

Mecco is Now Brady

Same exceptional service. New expanded marking and traceability product options. Learn more here.

Home
Virtual Product Support Resources

Brady Laser & Pin Marking System Support

Welcome to Brady's Virtual Product Support - our online library of engineering, training, and support resources. Start browsing below by using the search filters.

Download File

100 x 17 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 100 x 17N Superfast
Download File

100 x 17 Combination Unit Spec Sheet

PDF file of technical features for the Dot 100 x 17 P+N Superfast
Download File

100 x 17 OEM Unit Spec Sheet

PDF file of technical features for the Dot 100 x 17U Superfast
Download File

100 x 17 Portable Unit Spec Sheet

PDF file for technical features for the Dot 100 x 17P Superfast
Download File

120 x 40 Scribe OEM Unit Spec Sheet

PDF file of technical features for the Scribe 120x 40U Deep Marker
Download File

150 x 100 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 150 x 100N Standard
Download File

150 x 100 OEM Unit Spec Sheet

PDF file of technical features for the Dot 150 x 100U Standard
Download File

150 x 100 Portable Spec Sheet

PDF file of technical features for the Dot 150 x 100P Standard
Download File

160 x 17 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 160 x 17N Superfast
Download File

160 x 17 Combination Unit Spec Sheet

PDF file of technical features for the Dot 160 x 17 P+N Superfast
Download File

160 x 17 OEM Unit Spec Sheet

PDF file of technical features for the Dot 160 x 17U Superfast
Download File

160 x 17 Portable Unit Spec Sheet

PDF file of technical features for the Dot 160 x 17P Superfast
Download File

180 x 45 Scribe OEM Unit Spec Sheet

PDF file of technical features for the Scribe 180 x 45U Deep Marker
Download File

200 x 35 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 200 x 35N Deep Mark
Download File

200 x 35 OEM Unit Spec Sheet

PDF file of technical features for the Dot 200 x 35U Deep Mark
Download File

200 x 35 Portable Unit Spec Sheet

PDF file of technical features for the Dot 200 x 35P Deep Mark
Download File

3D Models of SuperFast 50x25

STEP Files for the SuperFast
Download File

50 x 17 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 50x17 N Superfast
Download File

50 x 17 Combination Unit Spec Sheet

PDF file of technical features for the Dot 50 x 17 P+N Superfast
Download File

50 x 17 OEM Unit Spec Sheet

PDF file of technical features for the Dot 50x17 (25)U Superfast
Download File

50 x 17 Portable Unit Spec Sheet

PDF file of technical features for the Dot 50x17 P Superfast
Download File

50 x 30 Scribe OEM Unit Spec Sheet

PDF file of technical features for the Scribe 50 x 30U Standard
Download File

60 x 40 Scribe OEM Unit Spec Sheet

PDF file of technical features for the Scribe 60 x 40U Standard
Download File

72 x 35 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 72 x 35N Deep Mark
Download File

72 x 35 OEM Unit Spec Sheet

PDF file of technical features for the Dot 72 x 35U Deep Mark
Download File

72 x 35 Portable Unit Spec Sheet

A spec sheet highlighting the 72 x 35 spec sheet.
Download File

75 x 15 Scribe OEM Unit Spec Sheet

PDF file of technical features for the Scribe 75 x 15U Superfast
Download File

80 x 80 Scribe OEM Spec Sheet

PDF file of technical features for the Scribe 80 x 80U Standard
Download File

90 x 60 Benchtop Unit Spec Sheet

PDF file of technical features for the Dot 90 x 60N Standard
Download File

90 x 60 Combination Unit Spec Sheet

PDF File of technical features for the Dot 90 x 60 P+N Standard
Download File

90 x 60 OEM Unit Spec Sheet

PDF file of technical features for the Dot 90 x 60U Standard
Download File

90 x 60 Portable Unit Spec Sheet

PDF file of technical features for the Dot 90 x 60P Standard
Auto Date allows you to automatically insert string with the appropriate time/date information. This video will show you how to set up Auto Date string rule and the different options available.

Auto Date String Rule

Auto Date allows you to automatically insert string with the appropriate time/date information.
How to check and set the correct standoff for your COUTH system, from the pin to the marking surface.

Checking & Setting Standoff

How to check and set the correct standoff for your COUTH system, from the pin to the marking surface.
When marking a barcode, there can be contrast difficulties as well as overburn. A clean up pass is used to increase the quality and consistency of the mark.

Clean Up Pass for Barcodes

Learn how to setup a clean up pass, which is used to increase the quality and consistency of the mark.
Download File

COUTHsmartbox Manual

The COUTHsmartbox Instruction Manual details installation, safety recommendations, screen descriptions, commands, and how to use the controller.
Custom string rule uses a format specifier string to create a customized string mark. This video will show the available format specifier options and how to use and set up some of them.

Custom String Rule Options

Custom string rule uses a format specifier string to create a customized string mark.
Download File

Demo EtherMark Jobs

Two demo job files
Download File

Dot Peen Startup Guide

A quick guide to allow users to get their machine out of the box and marking.
Download File

EtherMark Communication Guide

This manual provides the information required to implement the EtherMark control protocol in a production environment.
Download File

EtherMark EtherNet/IP Integration Kit

Integrate Laser or Dot Peen with EtherMark. Includes EDS file & resources for Allen-Bradley PLCs. (Version 0.97)
Download File

EtherMark PROFINET Integration Kit

Integrate Laser or Dot Peen with EtherMark. Includes GSD file & resources for Siemens PLCs. (Version 1.00)
External Start allows you to start the marking process from a controller/device outside of the software. This video shows how to enable external start and some of its options.

External Start

External Start allows you to start the marking process from a controller/device outside of the software.
Download File

Fiber Laser Controller

ZIP of Laser Controller Assembly files including PDF and STP
Download File

Fiber Laser Integrator's Guide

This document provides the information to integrate a Fiber Laser U-Model with third-party equipment or into an existing manufacturing line.
Host interface provides the means for external programs to communicate with WinLase. This video will help you enable and set up WinLase for Host Interface Mode.

Host Interface

This video will help you enable and set up Host Interface Mode, providing the means for external programs to communicate with WinLase.
Here are 3 ways to ensure you get consistently clear and readable laser marks no matter what material you are marking.

How to Ensure High-Quality Marks

Here are 3 ways to ensure you get consistently clear and readable laser marks no matter what material you are marking.
A look at the various insert functions within the T2 Controller

How to Insert Functions on T2 Controllers

A look at the various insert functions within the T2 Controller
MECCO demonstrates how to setup the a 2D Data Matrix mark and human readable text mark using the T2 Controller for the SuperFast.

How to Setup 2D & Text Mark on T2 Controller

MECCO demonstrates how to setup the a 2D Data Matrix mark and human readable text mark using the T2 Controller for the SuperFast.
Get an overview of WinLase Laser Marking Software, including the five main components and commonly used functions, so you understand the basics of how to set up a job file.

How to Use WinLase Laser Marking Software: Basics

Get an overview of WinLase Laser Marking Software, the five main components and commonly used functions, and understand the basics of how to set up job files.
Importing vector graphics allows you to bring in a non-Winlase format file into a Winlase format. This video shows you how to import files.

Importing Vector Graphic Files

Importing vector graphics allows you to bring in a non-Winlase format file into a Winlase format.
How to troubleshoot a COUTH dot peen machine for inconsistent marking depth or poor quality marks.

Inconsistent Marking Depth or Poor Quality Marks

How to troubleshooting a COUTH dot peen machine for inconsistent marking depth or poor quality marks.
A quick introduction to using MCVector for creating a logo file for the T2 Controller

Intro to MCVector

A quick introduction to using MCVector for creating a logo file for the T2 Controller
Download File

Laser Marking Service Plan

A list of the service options available for MECCO laser products
Download File

Laser Marking System Operator�s Manual

The Operator Manual describes the operation of and major maintenance procedures for personnel who will operate, maintain, troubleshoot and repair the laser mark
Download File

Laser Startup Guide

This guide details the items that are shipped with each laser, how to connect the laser system, and system startup/shutdown procedures.
Download File

LEC Remote API Programming Manual

This manual provides operation information for the LEC programming system.
Download File

LEC-1 Integrator Reference Manual

This manual provides operation, installation and troubleshooting information for the LEC-1 control board.
Download File

LightWriter 1200 Series Spec Sheet

A spec sheet that highlights the LightWriter 1200 Series
Download File

LightWriter 600 Series Spec Sheet

A spec sheet highlighting the LightWriter 600
Download File

LightWriter 600 Series with CODESOFT Spec Sheet

A spec sheet highlighting the LightWriter 600 Series with CODESOFT
Download File

LightWriter 600 Series with EZCAD Spec Sheet

A spec sheet highlighting the LightWriter 600 Series
Download File

LightWriter 800 Series Spec Sheet

A spec sheet highlighting the LightWriter 800 Series
Download File

LightWriter 800 Series with CODESOFT Spec Sheet

A spec sheet highlighting the LightWriter 800 Series with CODESOFT
Download File

LightWriter 800 Series with EZCAD Spec Sheet

A spec sheet highlighting the LightWriter 800 Series with EZCAD
Download File

LightWriter Class IV Spec Sheet

A spec sheet highlighting the LightWriter Class IV
Download File

LightWriter Class IV with CODESOFT Spec Sheet

A spec sheet highlighting the LightWriter Class IV with CODESOFT
Download File

LightWriter Class IV with EZCAD Spec Sheet

A spec sheet highlighting the LightWriter Class IV with EZCAD Spec Sheet
Download File

LightWriter D800 Spec Sheet

A spec sheet highlighting the LightWriter D800
Download File

LightWriter Engineering Drawings

PDF and STEP file of the LightWriter and LightWriter PRO Connect Laser Marking Workstation
Download File

LightWriter PRO Connect 1200 Series Spec Sheet

A spec sheet highlighting the LightWriter PRO Connect 1200 Series
Download File

LightWriter PRO Connect 600 Series Spec Sheet

A spec sheet highlighting the LightWriter PRO Connect 600 Series
Download File

LightWriter PRO Connect 800 Series Spec Sheet

A spec sheet highlighting the LightWriter PRO Connect 800 series
Download File

LightWriter with EZCAD Engineering Drawings

PDF and STEP files of the LightWriter with EZCAD Laser Marking Workstation
Download File

LMC-3 Laser Marking Software - Sell Sheet

Product information and technical specifications for the LMC-3 Embedded Laser Marking Controller from Lanmark Controls
There are several start-up settings when you open WinLase. This video will show you how to load a job file automatically when opening the laser marking software.

Loading Job at Start Up

This video will show you how to load a job file automatically when opening the laser marking software.
Lock Object prevents any changes to be done to the object either dimensionally or by profile settings. This video will show how to lock and unlock an object.

Lock Object

Lock Object prevents any changes to be done to the object either dimensionally or by profile settings.
This video will introduce Mark Style under the settings tab. This tool is commonly used in determing how to mark a barcode.

Mark Style Settings

This video will introduce Mark Style under the settings tab. This tool is commonly used in determing how to mark a barcode.
Create marking files on a computer quickly. This easy-to-use marking file creation and editing software application is designed for use with the T2 controller.

MCEdit Software Walkthrough

Create marking files on a computer quickly. This easy-to-use marking file creation and editing software application is designed for use with the T2 controller.
Download File

MCEdit2 Software

MCEdit2 Software for COUTH Dot Peen Marking Systems
Download File

MCVector Software

Software that converts logos and graphics to work with the COUTH marking systems. Simply import CAD files, BMP or JPEG images and trace the features.
Download File

MECCO Laser Controller Upgrade Guide

A document that walks customers through the process to upgrade their old "buckeye" controller to the new SMARTmark controller compatible with newer software.
This video explains the possible shutter errors and what could cause them.

MECCOMARK Controller: Diagnosing Shutter Errors

This video explains the possible shutter errors for older model MECCOMARK Fiber Lasers and what could cause them.
How to check the fuses in your laser marking system.

MECCOMARK Controller: How to Check Fuses

How to check the fuses in your laser marking system.
What to do when your laser marking software has disabled functions or can’t find your control card.

MECCOMARK Controller: Using Your License Key

What to do when your laser marking software has disabled functions or can�t find your control card.
How to safely remove the cover from a U-model laser rail.

MECCOMARK Fiber: Removing Laser Rail Cover

How to safely remove the cover from an older model MECCOMARK Fiber U-model laser rail
How to replace your laser’s scanhead.

MECCOMARK Fiber: Scanhead Replacement

How to replace your older model MECCOMARK Fiber laser�s scanhead.
How to check and replace your laser’s shutter solenoid.

MECCOMARK Fiber: Shutter Check & Replacement

How to check and replace your laser�s shutter solenoid on older model MECCOMARK Fiber Lasers.
Download File

OEM SMARTmark Manual

This OEM Laser Manual describes the operation of and major maintenance procedures for the OEM Lasers, manufactured by MECCO.
The System Security allows you to set different levels of permission within Winlase. We will show you how to determine the differences between these levels of permission, how to set up/change/delete passwords, and how to set up levels of access.

Password Protection

The System Security allows you to set different levels of permission within Winlase.
Download File

Pin Marking Maintenance Checklist

A maintenance checklist to help operators troubleshoot their dot peen machine
Download File

Pin Marking Service Plan

A list of the service options available for MECCO pin marking products
Preview Mark allows you to view where your objects will be marked on your material. This video will show you how to access Preview Mark and some of the alterations that can be made through the Preview Mark tool.

Previewing a Mark

Preview Mark allows you to view where your objects will be marked on your material.
Quick Mark is a set-up tool that will mark selected objects or all objects seen in the WinLase marking field. This tool will not mark actions or processes like automations or serializations. Run Process will mark everything inserted into the marking process. This video will show you how to use both functions and some of the differences between them.

QuickMark vs Run Process

Quick Mark is a set-up tool that will mark selected objects or all objects seen in the WinLase marking field.
Download File

Safety Seal Integrator's Guide

This manual describes the components of the Safety Seal, hardware and software interfaces, I/O channels, physical measurements, and environmental limitations.
Download File

Safety Seal Models

STEP files for the Safety Seal with Fiber laser
Download File

Safety Seal Spec Sheet

A spec sheet highlighting the Safety Seal
Learn more about how to use the new COUTH smartbox Controller for pin marking systems with this helpful product walkthrough.

Smartbox Controller Demonstration

Learn more about how to use the new COUTH smartbox Controller for pin marking systems with this helpful product walkthrough.
Download File

SMARTmark 2.5D Fiber Laser Spec Sheet
SMARTmark Controller: Removing Interconnect Board

How to remove the interconnect board from your laser controller.
An instructional video on how to remove the LEC card on SMARTmark controllers.

SMARTmark Controller: Removing the LEC Card

An instructional video on how to remove the LEC card on SMARTmark controllers.
Download File

SMARTmark Fiber Laser Spec Sheet

A spec sheet outlining the SMARTmark Fiber Laser
SMARTmark Fiber: Remove Laser Rail Cover

Instructional video on how to remove the laser rail cover for SMARTmark Fiber Laser models.
Instructional video on how to remove the collimator from the SMARTmark Fiber Laser rail.

SMARTmark Fiber: Removing the Collimator

Instructional video on how to remove the collimator from the SMARTmark Fiber Laser rail.
Download File

SMARTmark Green Laser Spec Sheet

A spec sheet outlining the SMARTmark Green Laser
Download File

SMARTmark UV Laser Spec Sheet

A spec sheet outlining the SMARTmark UV Laser
Download File

SMARTmark VP MOPA Fiber Laser Spec Sheet
Download File

SMARTmark VP MOPA Fiber Laser: Adjusting Pulse Width

A document detailing step-by-step instructions on how to adjust the pulse with on the SMARTmark VP MOPA Fiber laser
SMARTmark VP MOPA Fiber Laser: Adjusting Pulse Width Video

A step-by-step video detailing how to adjust pulse width on a SMARTmark VP MOPA Fiber Laser
Step and Repeat is a function used to mark a tray or array of parts. In this video, we will demonstrate how to set up an object for this process.

Step & Repeat

Step and Repeat is a function used to mark a tray or array of parts. In this video, we will demonstrate how to set up an object for this process.
Download File

SuperFast & T2 Controller Quick Guide

This quick guide mini manual outlines fundamentals of T2 operation, mark quality, standoff, troubleshooting, and maintenance recommendations
Download File

SuperFast Quick Guide

This is a quick guide to allow users and operators to get their pin marking machine running.
Download File

T2 Controller Models

ZIP folder of DWG, STEP and PDF files of the controller assembly
Part 1: The basic set up and overview of the T2 Controller Dot Peen Marking System.

T2 Controller Training Overview & Basics

The basic set up and overview of the COUTH T2 Controller Dot Peen Marking System.
Download File

T2 Instruction Manual

This manual covers specifications, installation, features and operation of the T2 controller.
How to program the T2 Controller with some basic features and functions.

T2 Training - Programming

How to program the T2 Controller with some basic features and functions.
Download File

WinLase COM Automation Server Reference Manual

This manual contains detailed information about installing the software in your computer and configuring it to interface with the COM Automation server.
Download File

WinLase LAN Host Interface User's Guide

This guide will assist you in using the Remote Interface services, either with a direct wired RS-232, through LAN based TCP/IP socket or a Fieldbus network.
Download File

WinLase LAN Software

Download WinLase LAN laser software files for use with your MECCO laser marking equipment.
Download File

WinLase LAN User Guide

Need Additional Support?

If the videos and documentation from our Virtual Product Support libary didn't help solve your problem, we're here for you! Get in touch with our service team to discuss your issue and get it fixed right away.

Support Options