The Patented Laser Safety Seal

Notice

To make sure our website works as smoothly as possible, we use cookies. By continuing to use our website, you agree to our use of cookies.

Accept Find out more
Download
Product Catalog

SMARTmark® Safety Seal

Models: 20W, 50W, 100W, and 200W Fiber

SMARTmark® Safety Seal

Sealing the Deal on Laser Safety

The patented SMARTmark® Safety Seal delivers Class 1 laser-safe integration without the need for expensive and large enclosures. The innovative design on the Safety Seal uses the part as the sixth side of the enclosure by vacuum sealing against the part, creating a light-tight, laser-safe environment.

All Safety Seals utilize a fume removal system to evacuate the marking debris in order to maintain internal cleanliness and mark quality.

Benefits
  • Ideal for large parts: engine blocks, transmission cases, crank & cam shafts, vehicle frames
  • Economical solution compared to large enclosures
  • Reliably used in automotive production plants

Get Pricing Schedule Demo



System Features

  • Compatible with any power level of SMARTmark Fiber Lasers
  • Easy to integrate - Integrates with your production line to know what and when to mark
  • Sliding snorkel to meet the part
  • Valuable tool for part location variation
  • Ideal for large parts
  • Up to 4" circle marking area
  • Fume removal system is supplied with every system - I/O triggered
  • Easy-to-remove protective window for lens cleaning and maintenance
  • Customizable rubber seal for part geometry and surface finish
  • Laser will only fire when properly sealed to the part

System Technical Specifications

Category:

Spec:

Laser Compatibility

Fiber or VP MOPA Fiber

Output Power

20W, 50W, 100W, or 200W

Power Requirements

20W-100W: 110/220 VAC, 10/5A, 50/60Hz
200W: 110/220 VAC, 15/8A, 50/60Hz

Wavelength

1064nm

M2

<1.4

Operation Mode

Pulsed

Pulse Rep Rate

Fiber: 25-200 kHz depending on model
VP MOPA Fiber: 25-600 kHz depending on model

Cooling

Air Cooled

Scanning Method

XY galvanometer

Weight

20W-100W: 47 lbs + Laser Rail (20 lbs)
200W: 47 lbs + Laser Rail (27 lbs)

Dimensions

18" x 19.25" x 10.5" + Laser Rail

Cable Length

9’ 

Controller Dimensions

19.5” x 5.2” x 18” + Laser Controller

Max Line Speed

 3,000 mm/sec using 254mm lens

Controls

LEC Embedded System Controller

Communications

Discrete I/O

Software 

WinLase Software

Software

SMARTmark lasers all use WinLase laser marking software with unique MECCO options configured to your needs. 

We also offer custom Graphical User Interfaces to help ensure that ease-of-use, automation, database integration and vision inspection meet the needs of your project. 

Safety Seal Product Resources

Product Resources are available in our Virtual Product Support section, including:
  • Software Files
  • Manuals
  • Integration Guides
  • Engineering Drawings
  • Troubleshooting Videos
  • Software Training Videos

Go To Downloads

The system is constantly drawing and measuring vacuum pressure on the part during the marking process. Sensors monitor the pressure, as well as part presence and cylinder position, in order to ensure that the Safety Seal meets all requirements for marking. If these safety conditions are not met or vacuum pressure drops while marking is in progress, the Safety Seal will close the safety shutter so that the laser output is interrupted. This safety circuit ensures laser safety at all times during the marking process.

Get Pricing

Use the form below to get pricing and details based on the requirements of your project.